
Organic silicon materials, as a type of semi-organic polymer compound with silicon-oxygen bonds (Si-O) as the main chain and side chains connected to other organic groups through silicon atoms, possess unique chemical structures that combine the heat resistance, cold resistance, and weather resistance of inorganic materials with the flexibility, hydrophobicity, and physiological inertness of organic materials. From aerospace to electronics and electrical, from building sealing to medical implants, the application range of organosilicon is extremely wide. However, in the production and processing of organic silicon materials, especially in the mixing, defoaming, and discharging stages of high-viscosity silicone rubber, they often face technical challenges such as high material viscosity, strict requirements for thermal stability, and susceptibility to bubble entrapment. The FDT Concentratic Double Shaft Agitator (referring to an efficient dispersion/agitation/discharge system for high-viscosity organic silicone materials) is a specialized production equipment developed based on the physical and chemical properties of organic silicon. Its aim is to solve efficiency bottlenecks in traditional processes and improve product consistency and yield through optimized mechanical structures and power transmission systems.
Ultra-high-viscosity and thixotropic silicone products, especially room-temperature vulcanized silicone rubber and high-temperature vulcanized silicone rubber used as sealants and adhesives, typically have large molecular weights and spiral molecular chains. Although the intermolecular forces are weak, the chain segments are severely entangled. This results in extremely high viscosity and poor fluidity at room or low temperatures. When mixing fillers (such as white carbon black) or additives, the material is difficult to level automatically, which can easily form a "dead zone". Ordinary mixing equipment is unable to stir it evenly.
Sensitivity to shear heat and temperature. Although the bond energy of Si-O bonds in the main chain of organosilicon can reach up to 121kcal/g molecule and has excellent thermal stability (can be used for a long time at -60 ℃ to 250 ℃), excessive local shear heat during production and processing, especially during mixing, may lead to pre-crosslinking or premature catalyst failure. Therefore, production equipment needs to have good temperature control capabilities or avoid excessive, ineffective friction heat generation while providing strong dispersion.
The difficulty of bubble removal is due to the low surface tension and low surface energy characteristics of organosilicon, which gives it excellent defoaming properties. However, in high-viscosity mixing processes, mechanical stirring can easily draw air into the interior of the material. Due to its high viscosity, once bubbles are formed, they are extremely difficult to naturally float and be expelled. If bubbles remain in the final product, they will seriously affect its insulation performance and mechanical strength as an electronic potting adhesive or precision seal.
In order to improve performance, it is often necessary to add various additives such as thermal conductive powder, flame retardant, coupling agent, etc. in the production of organosilicon for the uniformity of multi-component addition. These powders have a significant difference in wettability with the silicone oil matrix. If they are not evenly dispersed, it can lead to a particle-like texture, incomplete curing, or performance fluctuations in the product.
In response to the characteristics of organosilicon mentioned above, the equipment has made technological breakthroughs in the following aspects, thereby achieving significant improvements in production efficiency.
The planetary stirring and strong shear mechanism is designed to address the high viscosity characteristics of organosilicon, and FDT Concentric Double Shaft Agitator typically uses a multi-axis planetary stirring system. Unlike traditional single-axis stirring, this system includes a stirrer that revolves around the axis of the kettle, as well as two dispersing disks or stirring blades that rotate at high speed around their own axes.
Complex motion trajectory: This composite motion of revolution and rotation allows the stirring blade to sweep through every corner of the kettle at extremely high frequencies. For silicone rubber with a viscosity of up to hundreds of thousands of centipoise, this strong shear action can quickly break the powder agglomeration and fully wet the filler and matrix. Efficiency improvement point: Compared with traditional equipment, the mixing time of the FDT Concentric Double Shaft Agitator can be shortened by 30% -50%, and the mixing uniformity is significantly improved, directly increasing the output per unit time.
The application of a scraping system: Organic silicon materials are prone to adhere to the walls and bottom of the kettle, forming insulation layers and mixing blind spots. The FDT Concentric Double Shaft Agitator is equipped with a Teflon or polyurethane scraper (mountain-shaped scraper) that is linked to the stirring blade.
Dynamic update interface: The scraper continuously scrapes off the material adhered to the kettle wall and pushes it towards the high shear zone in the center as the stirring blade moves. This not only prevents the material from overheating and degrading, but also ensures that all materials can participate in the mixing process. Efficiency improvement point: Thoroughly eliminating mixing dead corners, ensuring consistency in product quality between batches, and reducing rework rates caused by uneven mixing.
Due to the sensitivity of organic silicon to bubbles, the FDT Concentric double-shaft agitator is usually designed with a complete vacuum interface that can be connected to a vacuum pump unit for the integration of vacuum degassing systems.
Negative pressure exhaust: During the mixing process, the equipment can maintain a high vacuum state inside. With the folding effect of the stirring blade, fine bubbles inside the material can be quickly extracted. Efficiency improvement point: The integrated process of "mixing defoaming" has been achieved. The traditional process may require mixing before transferring to the defoamer, while the FDT Concentrative Double Shaft Agitator achieves this in one step, significantly shortening the process flow and reducing energy consumption and labor costs.
The high viscosity of silicone in hydraulic discharge and sealing performance makes it a major challenge to obtain the material. The FDT Concentrative Double Shaft Agitator uses a hydraulic-driven pressure disc or screw pump for forced discharge.
Smooth conveying: The hydraulic system provides continuous and stable thrust, which can completely extrude high-viscosity silicone rubber from the bottom of the kettle with an extremely low residual rate. Sealing guarantee: The equipment adopts mechanical sealing or special packing sealing to prevent air leakage during high vacuum mixing and also to prevent material leakage during pressurized discharge. This is crucial for maintaining the purity of organosilicon. Efficiency improvement point: Fast and thorough discharge reduces the frequency and time of cleaning the equipment and improves the overall utilization efficiency (OEE) of the equipment.
Application in the production of room temperature vulcanized silicone rubber (RTV): RTV silicone rubber is commonly used in building sealants and electronic potting. This type of product has high requirements for color and transparency. The vacuum defoaming function of the FDT Concentric Double Shaft Agitator ensures that the finished product is bubble-free and highly transparent; Its fine dispersion ability ensures the uniform distribution of catalyst and crosslinking agent, thereby stabilizing the curing speed of the product. The improvement in production efficiency is reflected in the increase in single-batch production capacity and a significant reduction in scrap rate.
The application of high-temperature vulcanized silicone rubber (HTV) in mixing requires the addition of a large amount of gas-phase white carbon black as a reinforcing agent. Gas-phase white carbon black is extremely light and easy to fly, and difficult to disperse. The strong shear system of the FDT Concentrated Double Shaft Agitator can effectively disperse the white carbon black aggregates, allowing them to fully bond with the raw rubber, significantly improving the tensile strength and tear strength of the rubber material. At the same time, the hydraulic discharge system solves the problem of difficult discharge of high-hardness rubber materials, making the granulation or extrusion process smoother.
The application of thermal conductive materials in the preparation of thermal conductive silicone grease/silicone typically requires filling with a high proportion of alumina or boron nitride powder. These powders have a high density and are prone to precipitation. The planetary stirring structure of the FDT Concentrative Double Shaft Agitator can generate strong convection, prevent powder settling, and ensure the formation of a uniform thermal network of conductive particles in silicone oil. This not only enhances the thermal conductivity of the product, but also ensures its stability during long-term storage.
It precisely solves the pain points in organic silicon production through core technologies such as planetary strong stirring, dynamic wall scraping, vacuum defoaming, and hydraulic discharge. For organic silicon production enterprises, the introduction of FDT Concentrated Double Shaft Agitator means a shortened production cycle: mixing and defoaming are carried out simultaneously, significantly reducing process flow time. The improvement in product quality: higher dispersion and lower gas content directly enhance the physical and electrical insulation properties of the product. Reduction of operating costs: high degree of automation, less reliance on manual labor; Low material residue and high utilization rate of raw materials; More precise energy consumption control. Today, with the continuous expansion of organic silicon applications and the increasing demand for high-performance materials in the market, the FDT Concentric double shaft agitator has become a key driving force for the development of the organic silicon industry towards high efficiency, precision, and intelligence due to its excellent technical performance.